加工尺寸Timber lengths to be machined:

进料长度min./max.     300mm -6300mm

Ingoing lengths

进料宽度min./max. 20 - 200 mm

Ingoing widths

进料厚度min./max.   12-80 mm

Ingoing thicknesses

木材横截面max.180 x 50 mm

Cross sectionsmax.120 x 80 mm

截出固定长度min.80 mm

Fixed length at rear of saw

板材弯度(各个方向)        max.          10 mm / m

Bend of the boards

in all directions

厚度公差        +/- 3 mm

Thickness tolerance

锯切公差+/-1mm – +/-2 mm

Cutting tolerance

(在木材表面平滑和较少树脂的情况下，最小公差相对于固定长度1米以内 , 最大公差相对于固定长度2.5米以内)

(at a timber quality with a minimum share of resin and plane surface.

min. tolerance for fixed lengths up to 1 m

max. tolerance forfixed lengths up to 2.5m)

材种Timber species:软木或硬木Soft-/Hardwood

加工能力Capacity:

进料速度（无级变速）max.180 m/min.

Feed speed infinitely adjustable

锯切过程0.15 –0.3 秒

Cutting cycle(配伺服电机)

工作高度                         900 mm

Working height

装机容量Connected loads:

电机功率Electric connected loadapprox. 18 kW

电压Operating voltage380 Volt / 50 Hz (C/s)

电压波动Voltage variationsmax. 5 %

压缩空气Air consumptionapprox. 1200 NL/min.

生产压力Service pressureapprox. 8 bar

压缩空气接口直径Interface diameter of air consumption ducts16mm

吸尘风速Exhaust speedapprox.25 米/秒

吸尘管直径Diameter of dust exhaust ducts160mm(1个), 80mm(1个)

基本色Basic colour灰Grey RAL 7035

                                                 蓝Blue RAL 5030